Chocolate and Roses Tutorial

I made this Tut using PSP XI ,

but I think it can be made with another Versions too.

*************************************

You'll need for this Tut:

The PTU Kit "Chocolate and Roses" from René of Rebel Designz

1 Tube, the one i use is

©Ein Lee http://einlee.net

You can only use it with a License Number

and You can buy at Dreamscape Imaging

The Mask WSL_Mask133 from http://weescotslasscreations.blogspot.com/

*Thank You Hun*

*************************************

So let us begin ;)

At first Three Things:

After rezising you have to sharpen, so i don't need to write it all time ;)

But when we have to rotate it will be sharpen after rotating ;)

At all elements i put a Dropshadow, which you want to use or if you want to use is your turn, i don't write it in the Tut,

so if you want a Dropshadow feel free to use your own ;)

I used this Drop Shadow 2 / 2 / 100 / 8 / Black

C/P means Copy / Paste ;)

- New Image 500 x 500 - Fill with White - Open Mask and minimize

- C/P RebelDezigns_CnR-gli48 as new Layer - Rezise 60% - Move a bit up - click with the Magic Wand in the Frame - Selections Expand to 10 - New Rasterlayer -
C/P ScrapRD_CnR-gli10 in the Selection - Selections - None - Layer under Frame Layer.

- C/P Your Tube as new Layer and put in the frame

- C/P RebelDezigns_CnR-gli9 as new Layer - Rezise 50% - Flip Horizontal - below on the Right on the Frame - Layer under BG from Frame Layer - Duplicate - Flip Vertical.

- C/P RebelDezigns_CnR-gli6 as new Layer - Rezise 62% - Flip Vertical - put on the Frame.

- C/P RebelDezigns_CnR-gli45 as new Layer - Rezise 20% - above on the Frame / Beads.

- C/P RebelDezigns_CnR-gli20 as new Layer - Rezise 35% - on the Right Side on the Leaves / Frame.

- C/P RebelDezigns_CnR-gli36 as new Layer - Rezise 25% - below on the Right Side on the Chocolate Staple (gli20).

- C/P RebelDezigns_CnR-gli14 as new Layer - Rezise 30% - below on the Left Side on the Chocolate Staple.

- C/P RebelDezigns_CnR-gli42 as new Layer - Rezise 50% - Flip Vertical - place the Bow on the below Right End from the Stones.

- C/P RebelDezigns_CnR-gli13 as new Layer - Rezise 25% - below in the Middle on the Frame / Leaves - Layer under Stones Layer (gli14).

- C/P RebelDezigns_CnR-gli19 as new Layer - Rezise 30% - on the Left Side on the Leaves / Frame.

- C/P RebelDezigns_CnR-gli49 as new Layer - Rezise 25% - below on the Right Side on the Cupcake (gli19).

- C/P RebelDezigns_CnR-gli8 as new Layer - Rezise 20% - on the Right Side on the Heart - Layer under Candles Layer.

- C/P RebelDezigns_CnR-gli5 as new Layer - Rezise 30% - below on the Right Side on the Heart / White Rose - Layer under RibbonBow Layer.

- C/P RebelDezigns_CnR-gli47 as new Layer - Rezise 40% - below on the Right Side on the RibbonBow and so - Layer under Candles Layer - Duplicate - Flip Vertical.

- C/P RebelDezigns_CnR-gli29 as new Layer - Rezise 18% - Flip Vertical - above on the Chocolate Staple.

- C/P RebelDezigns_CnR-gli3 as new Layer - Rezise 15% - below on the Left Side from the Bow on the RibbonBow (where behind the Stones are, see my Tag) - Duplicate - Layer under RibbonBow Layer - activate the upper Rose Layer - erase with the Rubber what is on the Bow.

- C/P RebelDezigns_CnR-gli18 as new Layer - Rezise 22% - Flip Vertical - on the Left Side on the Heart / Cupcake - Layer under Heart Layer.

- C/P RebelDezigns_CnR-gli26 as new Layer - Rezise 35% - on the Right Side on the Chocolate Staple / CherryGlass - Layer under Beads Layer.

- C/P RebelDezigns_CnR-gli27 as new Layer - Rezise 30% - Flip Vertical - on the Left Side on the Frame / Cupcake - Layer under BG from Frame Layer.

- C/P RebelDezigns_CnR-gli1 as new Layer - Rezise 20% - place above on the Right Side on the Flower from the Beads.

- Crop Your Image so that You have not too much white Place on the Sides, but leave a bit white Space cause we have to ad the BG with Mask now ;)

- Activate the white BG Layer - Selections All - New Rasterlayer - C/P ScrapRD_CnR-pap1 in the Selection - Selections - None - New Masklayer from Image - WSL_Mask - Merge down Group.

- Put your Text or Name on the Tag and type the Copyright on it.

(Don't forget the License Number when use a Tube which need one).

Save as png or jpg and you are finished with the Tag.

*************************************

I hope you liked it,

if there is something wrong or you didn't understand something

feel free to send me an Email

*************************************

I think there are Tutorials look like this,

but this Tutorial i have not copy somewhere,

i have written it self and it's mine!!!

© by Schnegge