but I think it can be made with another Versions too.
*************************************
You'll need for this Tut:
The PTU Bundle "ScrapTK_Tin-Package-7",
which included a Scrapkit from TKDezigns
and 3 Tubes from
©Tin www.taintedtin.com
You can only use the Tubes with a License Number
and You get the Bundle at CDO
The Mask WSL_Mask260 from http://weescotslasscreations.blogspot.com/
*Thank You Hun*
*************************************
So let us begin ;)
At first Three Things:
After rezising you have to sharpen, so i don't need to write it all time ;)
But when we have to rotate it will be sharpen after rotating ;)
At all elements i put a Dropshadow, which you want to use or if you want to use is your turn, i don't write it in the Tut,
so if you want a Dropshadow feel free to use your own ;)
I used this Drop Shadow 2 / 2 / 100 / 5 / Black
C/P means Copy / Paste ;)
- New Image 500 x 550 - Fill with White - Open Mask and minimize
- C/P tk-TIN-pack-7-frame1 as new Layer - Rezise 60% - Rotate Free 75 Left - move to the Right - Duplicate - Flip Vertical - now move both so that the below free Edges are on the other (should look like a V now) -
now grab Your Lasso Tool and draw a Selection over both Frames (it´s better as with the Magic Wand cause of the Flowers on the Frame and so You have both Frames in one) - New Rasterlayer - C/P tk-TIN-pack-7-paper1 in the Selection - Selections None - Layer under both Frame Layers.
- C/P tk-TIN-pack-7-element19 as new Layer - Rezise 60% - Flip Horizontal - below on the Frames - Duplicate - Flip Vertical.
- C/P tk-TIN-pack-7-element29 as new Layer - Rezise 55% - place on the Ribbon.
- C/P 7-2-Tin-ressurection (or Your own Tube) as new Layer (I rezised by 75%) - above on the winged plate / in the Middle of both Frames.
- C/P again Your Tube and put in the Frames - activate the BG from Frames Layer - Selections - Select All - Float - Defloat - Activate one of the Tube Layers - Delete - activate the other Tube - Delete - Selections None - Activate the Right Tube Layer - Layer Properties on Multiplication - on the Left Tube Layer Layer Properties on Hard Light.
- C/P tk-TIN-pack-7-element21 as new Layer - Rezise 50% - Flip Horizontal - place above on the Tags (more to the Right) so that the End from the Hairs from the Tube are covered ;)
- C/P tk-TIN-pack-7-element9 as new Layer - Rezise 60% - on the above Left Corner from the Left Frame.
- C/P tk-TIN-pack-7-element15 as new Layer - Rezise 25% - Rotate Free 15 Right - above on the Right Wing from the Plate - Layer under Ribbon Layer.
- C/P tk-TIN-pack-7-element31 as new Layer - Rezise 35% - on the Left Side on the Flower from the Left Frame - Layer under BG from Frames Layer.
- C/P tk-TIN-pack-7-element34 as new Layer - Rezise 25% - place on the other Gear - Layer under BG from Frames Layer.
- C/P tk-TIN-pack-7-element36 as new Layer - Rezise 55% - Rotate Free 15 Right - move it so that the Right Rings are on the inner Frame from the Right Frame Layer under Tube Layer - Duplicate - Flip Vertical - move it so that the Rings are on the inner Frame from the Left Frame - now erase with Your Rubber the below Parts with the Bows from both Ribbons and merge the Ribbons visible together.
- C/P tk-TIN-pack-7-element2 as new Layer - Rezise 30% - Flip Horizontal - below on the Right Side on the Plate - Layer under Plate Layer - Duplicate - Flip Vertical.
- C/P tk-TIN-pack-7-element37 as new Layer - Rezise 45% - below on the Right Side from the Right Rose (so that the Right Part from the Bow looks over and the other Part is under the Rose) - Layer under Rose Layer - Duplicate - Flip Vertical.
- C/P tk-TIN-pack-7-element7 as new Layer - Rezise 35% - in the Middle on the Plate.
- C/P tk-TIN-pack-7-element5 as new Layer - Rezise 20% - above on the Right on the Doodle / Frame.
- C/P tk-TIN-pack-7-element4 as new Layer - Rezise 20% - on the Right Side in the Middle of the Right Frame - Duplicate - Flip Vertical - on the Left End from the Wing of the Plate.
- Crop Your Image so that You have not too much white Place on the Sides, but leave a bit white Space cause we have to ad the BG with Mask now ;)
- Activate the white BG Layer - Selections All - New Rasterlayer - C/P tk-TIN-pack-7-paper6 in the Selection - Selections - None - New Masklayer from Image - WSL_Mask - Merge down Group - Duplicate - Layer Properties on Overlay.
- Put your Text or Name on the Tag and type the Copyright on it.
(Don't forget the License Number when use a Tube which need one).
Save as png or jpg and you are finished with the Tag.
*************************************
I hope you liked it,
if there is something wrong or you didn't understand something
feel free to send me an Email
*************************************
I think there are Tutorials look like this,
but this Tutorial i have not copied somewhere,
i have written it self and it's mine!!!
© by Schnegge
Keine Kommentare:
Kommentar veröffentlichen