Januar 09, 2012

Skully Tutorial

I made this Tut using PSP XI ,

but I think it can be made with another Versions too.


You'll need for this Tut:

The PTU Kit "Skully" from Designs by Sarah

1 Tube, the one i use is

©Sherry Cotton http://zombielily.deviantart.com/

which You can buy here http://mytubedart.com/

You can only use it with a License Number

The Mask WSL_Mask241 and WSL_Mask297 from http://weescotslasscreations.blogspot.com/

*Thank You Hun*


So let us begin ;)

At first Three Things:

After rezising you have to sharpen, so i don't need to write it all time ;)

But when we have to rotate it will be sharpen after rotating ;)

At all elements i put a Dropshadow, which you want to use or if you want to use is your turn, i don't write it in the Tut,

so if you want a Dropshadow feel free to use your own ;)

I used this Drop Shadow 2 / 2 / 100 / 8 / Black

C/P means Copy / Paste ;)

- New Image 500 x 500 - Fill with White - Open Mask and minimize

- C/P sb_pmt_skully-frame 2 as new Layer - Rezise 60%.

- C/P sb_pmt_skully-pp10 as new Layer - New Masklayer from Image - WSL_Mask241 - Merge down Group - Rezise 75% - move it in the Middle from the Frame - Layer under Frame Layer.

- C/P sb_pmt_skully-scribble 3 as new Layer - Rezise 35% - below on the Left Side on / in the Frame - Layer under Frame Layer - Layer Properties on Dodge.

- C/P Your Tube as new Layer and put on the Right Side in the frame.

- C/P sb_pmt_skully-skully swirl and paste as new Layer - Rezise 40% - below on the Right Side on the Frame.

- C/P sb_pmt_skully-heart 1 as new Layer - Rezise 30% - on the Left Side in the Middle on the Frame.

- C/P sb_pmt_skully-skull 5 as new Layer - Rezise 20% - below on the heart 1 / Frame.

- C/P sb_pmt_skully-button 1 hat as new Layer - Rezise 35% - Rotate Free 9 Left - on the Right Side on the skull 5 - Layer under skully swirl Layer.

- C/P sb_pmt_skully-ribbon 2 as new Layer - Rezise 50% - below on the Frame (not really i the Middle, more to the Right Side).

- C/P sb_pmt_skully-skull 4 as new Layer - Rezise 22% - Rotate Free 11 Right - on the Left End from the ribbon 2 / skull 5.

- C/P sb_pmt_skully-skull 3 as new Layer - Rezise 20% - Rotate Free 11 Right - place on the Left Side on both skulls - Layer under skull 5 Layer.

- C/P sb_pmt_skully-tape 1 as new Layer - Rezise 50% - on the Right End on the ribbon 2 - Layer under skully swirl Layer (or Tube Layer, depends on Your Tube).

- C/P sb_pmt_skully-wing 4 as new Layer - Rezise 25% - above on the Left Side on the Frame (where the yellow Glitterscatters are) - Layer under Frame Layer - Duplicate - Flip Vertical.

- C/P sb_pmt_skully-stitches 1 as new Layer - Rezise 40% - Rotate Free 8 Right - with upper End on the Left below Side on the Left wing - Layer under wings Layers - erase with the Rubber what looks in the wing.

- C/P sb_pmt_skully-beads as new Layer - Rezise 40% - Rotate Free 90 Right - below on the Left Side on the ribbon / skull - Layer under ribbon Layer.

- C/P sb_pmt_skully-skully line 2 as new Layer - Rezise 40% - Rotate Free 25 Right - Layer under Frame Layer (not BG from Frame) and under Tube Layer (depends on Your Tube) - Layer Properties on Burn.

- C/P sb_pmt_skully-skull 1 as new Layer - Rezise 12% - Flip Vertical - place on the Right End from the ribbon.

- C/P sb_pmt_skully-zipper 2 as new Layer - Rezise 45% - Rotate Free 105 Right - with the Left End below on the Button / skull - Layer under Tape Layer.

- Crop Your Image so that You have not too much white Place on the Sides, but leave a bit white Space cause we have to ad the BG with Mask now ;)

- Activate the white BG Layer - Selections All - New Rasterlayer - C/P sb_pmt_skully-pp4 in the Selection - Selections - None - New Masklayer from Image - WSL_Mask297 -
Merge down Group - Duplicate - Layer Properties on Overlay.

- Put your Text or Name on the Tag and type the Copyright on it.

(Don't forget the License Number when use a Tube which need one).

Save as png or jpg and you are finished with the Tag.


I hope you liked it,

if there is something wrong or you didn't understand something

feel free to send me an Email


I think there are Tutorials look like this,

but this Tutorial i have not copied somewhere,

i have written it self and it's mine!!!

© by Schnegge

1 Kommentar:

  1. great looking tut Schnegge :) Can't wait to give it a go :)